Skid Steer Over the Tire 10 INCH WIDE

Over the TIre Skid Steer Tracks
Skid Steer Over the Tire 10 INCH WIDE
SKU: OTT10
Weight: 260 lbs
This is the over the tire track system for skid steer loaders with 10x16.5 pneumatic tires. These tracks are priced individually so you need to order two pieces for a complete set. The sets come fully assembled with all of the tools required for the installation. The tracks are priced individually so you need to add 2 tracks to the cart for a set.
Product Details

Our over the tire tracks are primarily designed for use in mud and environments and wet conditions where tires will not get the job done. Don't take the day off becuase of a little rain, that can be too costly to your business. Increase time on the job and traction with our easy to install skid steer tracks. See our Traxter Over the Tire Track System in action:

Why don't we offer rubber pads for our over the tire skid steer tracks? Competitors offer steel over the tire tracks with bolt-on rubber pads because historically steel tracks would do significant damage to driveways and concrete surfaces. Costly rubber pads were the solution. While we don't suggest frequent operation on concrete surfaces (because over the tire tracks are for traction), you can see in the video below that our Traxter OTT are designed to minimize damage to concrete. You can see the operator spinning the machine with no damage.

Spacers are required if you don't have at least three inches of clearance between the tire and the machine. Take a look at our very simple to install system. You can easily install these tracks as needed as opposed to complex systems that dedicate too much time to installation. Your tires can get the job done on a regular basis. We have the easy to install solution for the days when tires just won't do!



We stock over the tire skid steer tracks for skid steer models on ten inch wide tires with a wheel base between 33.5 inches minimum through 41.3 maximum. You can contact us about your model if your wheel base is up to 45.3 inches and we can customize a set for you. If your wheel base is longer than 41.3 then our standard set up will not be long enough for your machine. For the twelve inch wide over the tire track systems our standard set covers models with a wheel base of 37.4 through 45.3 inches. If your wheel base is up to 51.2 inches long then touch base with us prior to ordering so we can customize your order.

There are minimum requirements for the over the tire track systems that vary depending on your tire width. For a ten inch wide tire set up that has a wheel base within the ranges mentioned above your machine requires a minimum of 35 horsepower. We suggest a range of 35-85 for proper functionality. For the twelve inch wide option we need to know the exact width of your tire because there is such a wide variety of tire widths in the aftermarket that qualify as a twelve inch wide tire. We make two OTT skid steer track options for the various widths depending on your specific setup. We suggest a minimum of 55 horsepower with a safe range between 55 and 105 horsepower.